Hot Deals (503)708-2214

Spec:    

• Dimensions:  5.25 x 3 x 1 inches     
  
• Power Input: DC 11V to 15V with up to 5 amps required. A connection cord with alligator clips is provided for 
  connection to an auto battery. A 120v AC to 12v DC 5 Amp Power Adapter is an optional accessory - please 
  check our store for availability.
  
• Battery Type: Selectable between NiMh, NiCd, Pb (lead acid), Li-On, Li-Fe, and Li-Po.
  
• Charging Current: The charge current is adjustable from 0.1 amp to 5.0 amps in 0.1 amps increments.
  
• End of charge alarm: An alarm sounds when charging is complete.
  
• Circuit protection: Protects the charger and battery even if the battery connection is reversed.
  
• General Charging Connection: Several adapter cords with male banana connectors that plug into the charger 
  are provided. These include the following connection types:  male T-Plug, JST with female housing, and 
  universal female servo connector for connecting receiver battery packs. The general charging connection 
  allows you to charge 1 to 15 cell NiMh/NiCd and lead acid batteries. You can also charge all 1 to 6 cell Lipo 
  batteries by connecting to this charge lead, but you must also connect your Lipo battery to the appropriate Lipo 
  Balance Connector Port if you wish to Balance Charge your Lipo.
  
• Lipo Balance Connector Ports: There are five balance connector ports that allow you  to balance charge 2, 3, 4, 
  5 and 6 cell Lipo batteries. These ports are for the JST/XH balance connectors with 2.5mm pin spacing. This 
  balance connector is used on the following Lipos: 3E Model, Align, BatteryHobby, Common Sense RC version 2, 
  DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Hobby 
  Loong, Horizon E-flite, Horizon Parkzone, Imax, Mega Power, Mystery, Power Up, Protek, RadicalRC, Turborix, 
  Vampower, Venom, Walkera, X-Caliber and Zippy Lipos. The JST/XH connector is also used on Common Sense 
  RC version 1, DN Power, and Tenergy Lipos, but the polarity is the reverse of the others listed above. You 
  would need to reverse the polarity of the balance plug on these Lipos in order to balance charge them on the 
  XCharger B6.
  

Features:    
The XCharger B6 Balance Charger is designed with the avid RC enthusiast in mind, and will charge 1 to 6 cell Lipo 
batteries, 1 to 15 cell NiMh/NiCd batteries and 2 to 20 volt lead acid batteries. The XCharger B6  has an LCD display 
that shows you exactly what's happening with your battery, displaying the charge rate, the amount of electricity (mah) 
put into the battery, and the voltage for each cell of a Lipo battery that is being balance charged. The charge rate is 
adjustable from 0.1 amp to a maximum of 5.0 amps, so it will charge your large batteries in a reasonable time. The 
XCharger B6 is fully programmable, has several built-in safety features, and comes with adapter cords for connecting 
to several types of battery power leads.

To provide power to the charger, simply use the alligator clips to connect to any 11 to 15 volt power supply that 
provides 5 amps or more, such as an auto battery. A 120v AC to 12v DC 5 Amp Power Supply and a Car Plug Adapter 
Cord are optional accessories for this charger. Please check our store for availability.

The XCharger B6 charger has several programming features that must be set for charging various battery types and 
sizes. We include our own 'Quick Start Guide' with each charger, along with the standard operating manual supplied 
by the manufacturer.