Hot Deals (503)708-2214

Quick Start Guide
To record,
1) Unplug the USB cable
2) Set the REC/DV switch to DV
3) Set the ON/OFF switch to ON, the center blue light will go on.

4) To make a video with sound recording, (up to 80 minutes on a 2GB card)
a)        Press the round button until the center blue light flashes and recording starts.
b)        To end and save the recording, press the round button again. The blue light will stop flashing.

5) To make a sound only recording, (up to 30 hours on a 2GB card)
a)    Move the REC/DV switch to the REC position, the right green light will flash and recording starts.
b)   To end and save the recording, move the REC/DV switch back to DV. The green light will stop flashing.

6) To see the recordings, make sure the REC/DV switch is in the DV position, otherwise the computer will ask for 
drivers.
a)        The ON/OFF switch can be in either position.
b)        Connect the device to your computer using the USB cable provided.
c)        The device will be seen just like a Micro-SD card.
d)        Also, non-recording files can be saved to the device from the computer.

Notes,
•        If you have the REC/DV switch in the REC position when turning ON, the device will wake up recording 
Audio.
•        If the device is turned OFF during Audio or Video recording, the recording will NOT be saved.
•        Battery charge life is about 2 hours for Video recording